Bestsellers

Page:
  1. 1
  2. 2
  1. ShockTape - High Performance Grip Tape - 40" Long x 1" Wide x 3/32" Thick-1 Roll

    $19.95

    ShockTape is the world's best cushioning grip and anti-vibration tape. It is made with high tech polymers that absorb up to 94.7% of impact shock and vibration energy. Only ShockTape offers this level of shock and injury protection. Plus, ultra-strong 3M 300LSE adhesive keeps working even in the toughest of conditions. Learn More
  2. Anti-Walk Silent Feet Washing Machine Pads - Black

    $44.95

    For All Models of Top and Front Loading Clothes Washing Machines and Dryers

    Isolates up to 94.7% of vibration

    Limits Appliance Walking or Unwanted Movement

    Easy to Install (No tools or adhesives needed)

    10 Year Limited Warranty

    Learn More
  3. Small Round Clear 11.1mm(Dia) x 5.1mm(H) Cabinet and Furniture Bumpers

    Price From: $15.95

    Transparent Round Half Sphere Bumpers

    Dimensions:11.1mm (0.437") Diameter x 5.1mm (0.201") Height

    Heavy Duty Black Cylindrical Bumpers

    Easy Peel-and-Stick Adhesive Backing.

    Non-Slip, Non-Marring and Non-Scratching Skid Resistant Pads

    Perfect for Protecting Cabinets, Furniture and Electronics

    Learn More
  4. Sorbothane Vibration Isolation Reinforced Heavy Duty Square Pad 1/4" Thick

    Price From: $49.95

    Sorbothane vibration isolator pads are versatile anti-vibration pads that can be used as feet, stops, spacers and protectors in many different applications. The unique Sorbothane urethane is a durable, resilient, polymer that provides outstanding vibration isolation and non-skid properties. These pads feature a top and bottom layer of heavy duty fabric bonded directly into the rubber surface. This fabric adds significant shear strength and abrasion resistance. Sorbothane isolators help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. They feature a smooth, clean, black urethane surface. Use them on any audio and electronic equipment to prevent skipping and interference. Caution: This product contains plasticizer which may cause minor discoloration to wood, plastic, composite and other materials following prolonged contact.
    Isolation Pad with Fabric Top and Bottom
    Part Number Length Width Thickness Duro / Durometer Load Rating
    0510425-30-10 2.5” 2.5” 0.25” 30 200-300lbs
    0510425-50-10 2.5” 2.5” 0.25” 50 300-600lbs
    0510425-70-10 2.5” 2.5” 0.25” 70 600-1200lbs

    Learn More
  5. Sorbothane Vibration Damping Sheet Stock (12 x12in)

    Price From: $39.95

    Isolate It! Sorbothane vibration isolator sheets are versatile anti-vibration pads that can be used as feet, stops, spacers and protectors in many different applications. The unique Sorbothane ultra-soft urethane is a durable, resilient polymer that provides outstanding vibration isolation and non-skid properties. Sorbothane isolators help absorb impact and noise and have excellent resistance to aging; they will not harden or crack over time. They feature a smooth, clean, black urethane surface. Use them on any audio and electronic equipment to prevent skipping and interference.

    More is not better. A large lightly loaded sheet will have a high spring rate and will not deflect enough to provide good isolation. Over compression will lead to short service life. The proper compression range is 3 to 20 per cent depending on the "Shape Factor." Shape factor is the ratio of contact surface (one side) divided by perimeter area. Geometry matters. Small circular pieces and rings "bulge" better than squares and rectangles. "Bulgeability" makes for better isolation. Use many small discs rather than a few large rectangles for best vibration isolation performance. Thickness matters. The thicker the sheet the lower the natural frequency. You need a sheet at least one-inch thick to get your natural frequency down to 10 Hertz. (10 Hertz is your target natural frequency for a 900 RPM motor.) Use the natural tackiness of Sorbothane or apply adhesives to glue the Sorbothane to metal plates on both sides or consider a custom design with molded-in stud mounts. This sheet is perfect for cutting to meet the needs of special applications or can be used whole. Can be cut with scissors or a sharp utility knife.
    Caution: This product contains plasticizer which may cause minor discoloration to wood, plastic, composite and other materials following prolonged contact. Learn More
  6. 2" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive

    $27.95

    Sorbothane 2" (5.08cm) Bumper

    Each of these, 2 inch (5.08cm), Sorbothane hemispheres / “Bumpers” are rated to effectively isolate an object weighing anywhere from 11 pound to 38 pounds per hemisphere, depending on the duro selected.

    Part Number Diameter Height Duro / Durometer Recommended load per Hemisphere PSA
    0510141-30-10 2” 1” 30 11-16lbs Yes (3M 200MP High Tack adhesive)
    0510141-50-10 2” 1” 50 17-24lbs Yes (3M 200MP High Tack adhesive)
    0510141-70-10 2” 1” 70 25-38lbs Yes (3M 200MP High Tack adhesive)
    Learn More
  7. Sorbothane Male/Female Vibration Stud Mount - 4 Pack

    Price From: $45.95

    These are “Male Female” mounts meaning one side has a threaded style that extrudes the bumper (Male side) and the other side has a threaded style that goes into the bumper (Female side)

    These ultra-high quality anti-vibration mounts are designed to provide the best vibration reduction possible. Each mount in comprised of high quality fasteners and industry leading Sorbothane visco-elastic polymer. The unique vibration damping properties allow it to behave like a fluid but retain its shape for millions of cycles, far exceeding the limits of other materials like silicone, rubber and neoprene. These mounts are designed for compression applications where very low shear force is present. When installing use high-quality thread deforming lock nuts or double jam nuts to ensure that your connections do not vibrate loose. Not recommended for high amplitude vibrations. This product contains plasticizer and may cause discoloration to materials that are in contact with it for extended periods of time. Made in the USA from US materials.

    Learn More
  8. 1.5" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive

    Price From: $20.95

    Sorbothane 1.5" (3.81cm) Bumper

    Each of these, 1.5 inch (3.81cm), Sorbothane hemispheres / “Bumpers” are rated to effectively isolate an object weighing anywhere from 4 pound to 30 pounds per hemisphere, depending on the duro selected.

    Part Number Diameter Height Duro / Durometer Recommended load per Hemisphere PSA
    0510131-30-10 1.5” 0.75” 30 4-7lbs Yes (3M 200MP High Tack adhesive)
    0510131-50-10 1.5” 0.75” 50 7-14lbs Yes (3M 200MP High Tack adhesive)
    0510131-70-10 1.5” 0.75” 70 14-30lbs Yes (3M 200MP High Tack adhesive)
    Learn More

Page:
  1. 1
  2. 2